cc65/libsrc at 74fb91a3a2efcab6d97468788f5e26f2ac7e2ff2 - cc65

apple2

I wasn't aware that the unit numbers in the ProDOS device list contain device type identifiers in the low nibble. So if we can't use the device list entries as-is we can as well present the high nibble as low nibble to the user thus providing more meaningful device numbers.

2012-10-15 21:59:51 +00:00

apple2enh

I wasn't aware that the unit numbers in the ProDOS device list contain device type identifiers in the low nibble. So if we can't use the device list entries as-is we can as well present the high nibble as low nibble to the user thus providing more meaningful device numbers.

2012-10-15 21:59:51 +00:00

atari

Removed DIO specific typedefs which were just aliases to basic types and replaced the term 'drive' with 'device' in order to harmonize with the recently added device.h.

2012-10-11 18:22:49 +00:00

atmos

Tape load and save functions for the Oric Atmos. By Stefan Haubenthal.

2012-05-28 11:11:39 +00:00

c16

Reverted r5835 because of Olivers changes to the asm includes.

2012-10-02 18:15:39 +00:00

c64

Turned the 'ST' status byte into a symbol resolved by the linker in order to allow to use it from code living in the 'cbm' directory.

2012-09-30 18:20:15 +00:00

c128

Turned the 'ST' status byte into a symbol resolved by the linker in order to allow to use it from code living in the 'cbm' directory.

2012-09-30 18:20:15 +00:00

cbm

Added check for disk in drive on chdir().

2012-10-17 20:24:43 +00:00

cbm510

Patch by Stefan Haubenthal: Remove __fastcall__ in comments and/or the

2012-03-04 13:08:54 +00:00

cbm610

Patch by Stefan Haubenthal: Remove __fastcall__ in comments and/or the

2012-03-04 13:08:54 +00:00

common

Modifications for smaller code size.

2012-07-10 20:45:16 +00:00

conio

Added --forget-inc-paths to the assembler command line to avoid problems if

2009-12-18 11:58:50 +00:00

dbg

Added --forget-inc-paths to the assembler command line to avoid problems if

2009-12-18 11:58:50 +00:00

em

Forgot to add the new module that contains em_load_driver.

2012-07-23 06:18:58 +00:00

geos-apple

My recent decision to reuse the character specification table from the base target was based on the fact that CBM GEOS used a copy of the CBM character specification table for the last ten years.

2012-02-17 20:23:35 +00:00

geos-cbm

Removed DIO specific typedefs which were just aliases to basic types and replaced the term 'drive' with 'device' in order to harmonize with the recently added device.h.

2012-10-11 18:22:49 +00:00

geos-common

Removed revers as it doesn't influence clrscr, cclear, chline, cvline and does look pretty ugly on cputs because there's no opaque background.

2012-10-19 07:11:04 +00:00

joystick

Patch by Stefan Haubenthal: Remove __fastcall__ in comments and/or the

2012-03-04 13:08:54 +00:00

lynx

Change address of sec loader

2012-09-15 12:57:37 +00:00

mouse

Patch by Stefan Haubenthal: Remove __fastcall__ in comments and/or the

2012-03-04 13:08:54 +00:00

nes

Patch by Stefan Haubenthal: Remove __fastcall__ in comments and/or the

2012-03-04 13:08:54 +00:00

pet

Turned the 'ST' status byte into a symbol resolved by the linker in order to allow to use it from code living in the 'cbm' directory.

2012-09-30 18:20:15 +00:00

plus4

Need to import ST since it is no longer declared in plus4.inc.

2012-10-02 19:22:19 +00:00

runtime

Rewrite code for arithmetic right shift.

2012-07-11 20:57:02 +00:00

serial

An already loaded driver is an error in ser_load_driver, because the library

2012-07-22 19:54:04 +00:00

supervision

Exclude (small) stack from RAM memory area (like on most other targets) to make explicit that the linker may not use all RAM. If the cc65 parameter stack isn't used at all the __STACKSIZE__ symbol may be overridden on the linker command line with -D __STACKSIZE__=0.

2010-10-02 10:20:00 +00:00

tgi

Fix calculation of text width for bitmap fonts.

2012-09-20 21:14:46 +00:00

vic20

Turned the 'ST' status byte into a symbol resolved by the linker in order to allow to use it from code living in the 'cbm' directory.

2012-09-30 18:20:15 +00:00

zlib

Added --forget-inc-paths to the assembler command line to avoid problems if

2009-12-18 11:58:50 +00:00

Makefile

Generate and package a matching emd binary of the new driver for the target

2012-09-05 13:45:17 +00:00